brakes toolbox
rear drum puller inserts oil seal into the ring nut
tool to mount the rear drum onto the stub shaft front brake shoe centraliser. fits all sizes
rear brake shoe centraliser. 2 sizes of tool. 35mm and 36mm
rear drum nut socket 44mm or 1.3/4" rear drum machining mandrel for 35mm bearing size
it is screwed into the ring nut threads and centred in a lathe
this is part of a service to re-claim faulty and worn drums
rear drum machining mandrel.36mm bearing size 14mm x 6 sided socket to adjust the front drum brakes. 9mm thickness
it is screwed into the ring nut threads and mounted in a lathe.
this is part of a service to re-claim faulty and worn drums