01484 322310
07511 015141
grstools@yahoo.co.uk
2cvtools.com
65 Roundway
Honley
Holmfirth
West Yorkshire
HD9 6AT
United Kingdom
2CV TOOLS
Engine tools
Old style crankshaft oil seal puller. Obsolete now.
Crankshaft front and rear oil seal removal Front oil seal insertion
90 degree hook with slide hammer All engines
All engines
Rear oil seal insertion Spigot bush/ needle bearing removal
3 different sizes--- 602, 425/435, M4 All engines
Spigot bush/needle bearing insertion Main bench stand
All engines used with engine or gearbox support stands
Engine stand + 2 spacers for securing Engine mounted on stand
to the long crankcase bolts
Pivots on 16mm bolt, turns full circle
Crankcase can be split when holding
engine at 90 degrees with this stand
Starter motor adapter plate Starter motor adapter plate
to test engine on bench Teeth engage perfectly on ring gear
cylinder head lapping tool timing tool centrifugal advance tool
12mm carb spanner valve spring compressor
74mm 602 piston ring compressor valve stem oil seal insertion tool. 2 sizes.
other sizes available inc visa
piston pin extractor oil cooler union spanner
extended sockets for the rocker arm screws push rod tube dismount and insertion tools
Dynamo extractor bolt Adjustable cylinder head stand
Small end bush puller and inserter
Fan removal drift 22mm diameter